Shopping Cart
Fluke Ti450 SF6 Gas Leak Detector and Infrared Camera-

Fluke Ti450 SF6 Gas Leak Detector and Infrared Camera

A combination of an infrared camera and gas leak detector in one compact tool. You can easily switch from infrared to gas mode, and the hard to reach areas are easy to diagnose with the pistol grip comfort and simplicity of the point-and-shoot feature. Additionally, you can locate an SF6 leak without turning off the tool.

Contact us for price & stock availability

SKU: TI450 SF6

Category:

Description

Infrared for every day, SF6 gas detection when you need it

Manual focus – only front pipe in focus.

MultiSharp™ Focus produces an image focused throughout the field of view.

Manual focus – only 1 motor in focus.

MultiSharp™ Focus – front and back motors in focus.

Passive autofocus systems may only capture the near-field subject (fence).

LaserSharp® Auto Focus captures your designated target.

Regular resolution.

SuperResolution. Get 4x the pixel data – a 640 x 480 image.

Standard lens.

4x Telephoto infrared smart lens.

Capture and save measurements from your wireless-enabled test tools to the Fluke Connect® app on your smartphone.

Asset analysis dashboard: Easily compare complex data.

With a sharply focused image, there is a distinct contrast between areas of varying thermal energy on the surface being inspected. This allows the individual detector elements (also known as pixels) to clearly report the intensity of the energy being focused on them.

LaserSharp™ Auto Focus uses a built in laser distance meter that provides both speed and precision. The laser-driven target detection pinpoints the target while the camera focuses to capture a precise, high quality image. With LaserSharp Auto Focus, you can:

MultiSharp™ Focus takes multiple images from different focal distances and combines them into one clear image. With a simple point and shoot, you can go from being completely out of focus, to complete focus, throughout the field of view. With MultiSharp:

1.Middleground in focus

2.Foreground in focus

3.Background in focus

Infrared inspections can take you into multiple types of environments with many types of equipment. Interchangeable lenses that require no calibration give you the versatility and the image quality needed to conduct inspections in almost any environment.

High voltage power pole, captured with a TiX560 camera and standard lens

The same power pole captured from the same distance, but with a 2x telephoto lens

The same power pole captured from the same distance, but with a 4x telephoto lens

With IR PhotoNotes™, voice or text annotation, you can easily document critical information about each piece of equipment and its location. Each “note” attaches to the image, so you never have to search or match up notes to images.

IR Fusion™ technology combines a visible light and an infrared image into one, giving you better clarity.

IR Fusion picture-in-picture mode: Ironbow palette

IR Fusion picture-in-picture mode: AutoBlend

IR Fusion color alarm

Review thermal images side by side, making it easy to compare today’s reading with the baseline or other historical images.

This gas leak detector and infrared camera delivers pinpoint state-of-the-art SF6 detection. This tool enables you to conduct two critical functions with one tool. Additionally, you can conduct infrared and gas inspections whenever and wherever needed.

When the focus is poor, the incoming energy isn’t as concentrated on individual detectors, and their response is skewed. This can lead to temperature measurements that are significantly off, resulting in expensive downtime and possible safety hazards.

LaserSharp Auto Focus allows you to select and focus on a specific target

Features

Thermal imagers are made with 100% diamond-turned germanium lenses covered with a specialty coating, providing premium quality images.

Designed for dependability

  • TrendIt™ Graphs: Use graphing to show changes in measurements, allowing you to graph and show problems instantly.
  • EquipmentLog™ History: Access equipment history building a database of equipment health and baselines with cloud backup.
  • ShareLive™ Video Calls: Save, collaborate and share measurements instantly with your team anytime, from anywhere.
  • AutoRecord™ Measurements: Instantly save measurements to your phone with Cloud backup.
  • Fluke Cloud™ Storage: Securely access equipment records anywhere, anytime.

Two critical solutions in one remarkable IR camera

Additional information

<10 lbs Annual Gas Loss Rate

Excellent outdoor conditions necessary – large temperature difference between gas and background, no wind

Minimum Span (in Auto Mode)

5.4°F (3.0°C)

>50 lbs Annual Gas Loss Rate

Easy detection in moderate conditions

AutoBlend™ Mode

Min, Mid, Max IR plus full visible on camera; continously variable in software

Picture-In-Picture (PIP)

Yes

IR/Visible Alarm

Yes

Full IR

Yes

Full Visible Light

Yes

Ruggedized Touchscreen Display

3.5" (landscape) 640 x 480 LCD

Rugged, Ergonomic Design for One-Handed Use

Yes

Thermal Sensitivity (NETD)

≤0.025 ̊C at 30 ̊C target temp (25 mK)

Filter Mode (NETD improvement)

Yes

Fast Auto Toggle Between Manual and Auto Modes

Yes

Fast Auto-Rescale in Manual Mode

Yes

Auto Capture (Temperature and Interval)

Yes

10 to 50 lbs Annual Gas Loss Rate

Good outdoor conditions – moderate temperature difference between gas and background, no wind

Extensive Memory Options

Removable 4 GB micro SD memory card, 4 GB internal flash memory, save to USB flash drive capability, upload to Fluke Connect® Cloud for permanent storage

Image Capture, Review, Save Mechanism

One-handed image capture,review, and save capability

Image File Formats

Non-radiometric (.bmp) or (.jpeg) or fully-radiometric (.is2); no analysis software required for non-radiometric (.bmp, .jpg and .avi) files

Memory Review

Thumbnail and fullscreen review

Software

SmartView® software – full analysis and reporting software and Fluke Connect® system

Export File Formats with SmartView® Software

Bitmap (.bmp), GIF, JPEG, PNG, TIFF

Voice Annotation

Yes

IR-PhotoNotes™

Yes

Text Annotation

Yes

Video Recording

Standard and radiometric

File Formats Video

Non-radiometric (MPEG – encoded .AVI) and fully-radiometric (.IS3)

Remote Display Viewing

Yes, see the live stream of the camera display on your PC, smartphone, or TV monitor. Via USB,WiFi hotspot, or WiFi network to SmartView® software on a PC; via WiFi hotspot to Fluke Connect® app on a smart phone ; or via HDMI to a TV monitor

Remote Control Operation

Yes, through SmartView® desktop software or Fluke Connect® mobile app

Minimum Span (in Manual Mode)

3.6°F (2.0°C)

Batteries (Field-Replacable, Rechargable)

3-4 hours per battery (*actual life varies depending on settings and usage)

Storage Temperature

14 to 122 ̊F (-10 to 50 ̊C)

Relative Humidity

10 to 95% non-condensing

AC Operation

AC operation with inclusded power supply (100 to 240 V AC, 50/60 Hz)

Power Saving

User selectable sleep and power off modes

Temperature Measurement Range (Not Calibrated Below -10 ̊C)

14 to 2192 ̊F (-20 to 1200 ̊C)

Accuracy

±2 ̊C or 2% (at 25 ̊C nominal, whichever is greater)

On-Screen Reflected Background Temperature Compensation

Yes

On-Screen Transmission Correction

Yes

Live Line Marker

Yes

Standard Palettes

8: Ironbow, Blue-Red, High Contrast, Amber, Amber Inverted, Hot Metal, Grayscale, Grayscale Inverted

Ultra Contrast™ Palettes

8: Ironbow Ultra, Blue-Red Ultra, High Contrast Ultra, Amber Ultra, Amber Inverted Ultra, Hot Metal Ultra, Grayscale Ultra, Grayscale Inverted Ultra

Color Alarms (Temperature Alarms)

High temperature, low temperature, and isotherms (within range)

Infrared Spectral Band

7.5 to 14 µm (long wave)

Operating Temperature

14 to 122 ̊F (-10 to 50 ̊C)

Battery Charge Time

2.5 hours to full charge

Charging Accessories

Two-bay battery charger or in-imager charging. Optional 12 V automotive charging adapter

Center-Point Temperature Measurement

Yes

Spot Temperature

Hot and cold spot markers

User-Definable Spot Moarkers

3 user-definable spot markers

Center Box

Expandable-contractible measurement box with MIN-MAX-AVG temp display

Dimensions

10.9 x 4.8 x 6.5" (27.7 x 12.2 x 16.7 cm)

Weight

2.3 lbs (1.04 kg)

Safety

IEC 61010-1: Overvoltage category II, Pollution Degree 2

Electromagnetic Compatibility

EIEC 61326-1: Basic EM environmental, CISPR 11: Group 1, Class A

Austrialian RCM

IEC 61326-1

USFCC

CFR 47, Part 15 Subpart B

Vibration

0.03 g2/Hz (3.8 g), 2.5 g IEC 68-2-6

Shock

25 g, IEC 68-2-29

Drop

Engineered to withstand 6.5' (2 m) drop with standard lens

Enclosure Rating

IEC 60529:IP54 (protected against dust, limited ingress; protection against water spray from all directions)

Related Products

Featured Test & Measurement Products​

Need Help? Chat with us
Please accept our privacy policy first to start a conversation.